Feedback

Products of "Engineering Services"


Displaying : 1 to 20 of 62 products

Ratio Transfer Pump

Use for:

For use with polyurethane foam, polyurea, solvent-borne, water-borne, oil materials. For professional use only. 200 Liter (55 Gallon) Drum Size.

 

Features: 

  •          Fully air operated
  •          2 ball piston design provides uniform positive displacement
  •          Extremely durable pump with long life packing
  •          Removable Drum Adapter
  •          Higher Viscosities
  •          Ease of Cleaning
  •          Longer Pump Section 

 

Technical Data:

Pressure ratio

2:1

Max. fluid flow

2.5gpm (9.5 lpm)

Maximum fluid working pressure

360 psi (2.5 MPa, 25 bar)

Maximum air inlet pressure

180 psi (1.2 MPa, 12 bar)

Pump cycles per 1 gallon (3.8 liters)

40

Maximum recommended pump speed for continuous operation

100 cycles per min (150 cycles per min intermittent)

Gallons (liters) per pump cycle     

0.025 (0.095)

Maximum ambient temperature

120° F (50° C)

Maximum fluid temperature

180° F (82° C)

Wetted parts

Stainless Steel, PTFE, PEEK

Air inlet port

1/4 npt(f)

Fluid outlet port

1/2 npt(f)

Weight

18.5 lbs. (8.4 kg)

Sound Pressure

87.9 dB(A) at 80 psi (0.55 MPa, 5.5 bar)

Sound Power, per ISO 9614-2

97.1 dB(A) at 80 psi (0.55 MPa, 5.5 bar)

 

 

Location : Vadodara


Krishna Insulations & Engineers Pvt. Ltd.

  • Address : Plot No. 193- A, G. I. D. C. Industrial Estate, Near Telephone Exchange, Nandesari,
    Vadodara - 391340,
    Gujarat, India
  • 9825223858

  • Website : http://www.krishnainsulations.com/

Pneumatic Test Pump

Make - Fluke

Model - 700 PTP-I

Location : Vadodara


TCM Industries

  • Address : 17 , Shubh Lakshmi Industrial Estate, Pratapnagar, Dabhoi Road,
    Vadodara - 390019,
    Gujarat, India
  • 9904820841

  • Website : http://www.tcmindustries.in

Cold Rooms Repairs & Services

On-site repair Support for wide variety of spares, Routine maintenance up keeps the efficiency of Cold Room.

Features:
* Global quality standards
* Excellent installation standards
* Long Life

Location : Vadodara


Hi-Tech Engineers Ac repair service I Ac AMC I Ac installation

  • Address : SB-25, Paradise Complex, Nr. Havmour Restaurant, Infront Of MSU, Sayajigunj,
    Vadodara - 390005,
    Gujarat, India
  • 9974987555

  • Website : http://www.hitechaircon.in

Hitech Clean 205

Generation Four Engitech offers a range of Thermic Fluid System Cleaning Chemicals, Hitech Clean 205 Hitech Clean 206, in collaboration with Source Explorer Ltd, Hongkong. These are Efficient Cleaning Chemicals for Cleaning of Thermic Fluid System that can provide: high efficiency incorporated with effective cost; safety to the devices; and clean environment. Thermic Fluid System Cleaning Chemical HITECH CLEAN 205 HITECH CLEAN 206. is International Cleaning Chemical available in India. Its working includes carbon dispersion technology, detergent technology & varnish emulsification technology that cleans the system 100%. We at GENERATION FOUR ENGITECH LTD have been manufacturing, very cost effective HITECH CLEAN 205 (POWDER), that has highly efficient carbon varnish dispersion agent that soften all your carbon deposits from coil, pipelines and radiators & does not react with metal. It blast carbon chips from the surface of the system and minimize the carbon strength to zero. HITECH CLEAN 206 (LIQUID) is easily soluble in water and its heavy duty carbon detergent cleans the system within a blink, Hence, carbon & varnish could be drained upto 100% resulting in carbon free system.

 The product cleans the system 100%, using varnish emulsification technology compatible with all thermic fluids, a low cost solution that makes use of carbon detergent technology and carbon dispersion. Physical Properties, Hitech Clean 205: composition – mixture of chemicals (dispersant agent); appearance – dark brown colour powder and crystal when diluted in water appearance pleasant green emulsion; solubility – 100% soluble in water; shelf life – 5 years in airtight bag, 12 hrs if diluted in water and 24 hrs in open bag. 

Distinct features of HITECH CLEAN 205 HITECH CLEAN 206 includes compatibility with all thermic fluids and easy mixture with water.

The suppliers of HITECH CLEAN 205 HITECH CLEAN 206 are backed by proactive and efficient services and provide with their engineers, guidance & technical support for flushing procedure.

Location : Jodhpur


Hitech Solution

Fast Tech Institute Of Advance Technologies

Fast Tech Institute Of Advance Technologies is number 1 institute of India for advance chip level laptop repairing course , mobile repairing course , cctv repairing course , printer repairing course and projector repairing course . Fast Tech provides advance Service center training with the help of BGA Machine, CRO Machines. BIOS programmer and other Advance Machines. Our Training duration is 3 month and 1 month. With the help of expert faculties we provide advance level repairing course. Fast Tech also provides service center facility for desktop, laptop, mobile, cacti, projector and printers etc. We have experienced faculties and our infrastructure is best in this industry. We also provide franchisees to the institutions in other cities if they fulfill our needs of quality technical education.

Location : Delhi


Fast Tech Institute Of Advance Technologies

Automotive

As the automotive sector has become extremely competitive in recent years, the margins have narrowed down, even though the volumes are on the rise because of the expanding market size.
Auto companies have realised that the only way to maintain a healthy bottom-line along with the growing top-line in this...
 

Location : Vadodara


Sit Flexible Hose Private Ltd.

Fabrication And Erection

We are actively engaged in providing highly efficient Fabrication and Erection Solutions. We have set a remarkable example in the industry by consistently delivering the best Fabrication and Erection Services. Our dedicated professionals undertake flawless Erection and Fabrication work assuring safety in every aspect. First, we fabricate the material as per client’s given specifications and later install it at their end.

 

Location : Vadodara


Umiya Corporation

Core Cuttings

Krisna Cotrex is the market leaders in providing Core Cutting service by Hilti DD 300 machine. We are able to provide you up to 500 dia core size and depth as per requirement. We provide you a hassle free service without much vibration and noise. Our team of expert technicians will do the assigned work with full efficiency and within the given time limit.

 

Some of the highlights are:

 

  • Expert team assigned for your convenience
  • Noise free and vibration free cutting
  • Advanced machines are used for cutting
  • Cost effective

Location : Vadodara


Krisna Cotrex

Aquaguard 200

 

Technical Specification

Dimension in MM (L x B x H)

355 x 102.7 x 307

Net Weight (Kgs)

6.5

Water Flow Rate (Liters per Hour)

200 LPH (3.33 LPM)

Input Voltage

230 V AC

Input Wattage

35 Watt

UV Lamp Wattage

16 Watt

Water Pressure (Min. to Max)

0.4 to 2.0 Kg / Cm2

Location : Ahmedabad


A-One Engineering Corporation

  • Address : A/3, M.B. Patel Shopping Center, Jashodanagar - Vatva Road, Vatva,
    Ahmedabad - 382445,
    Gujarat, India
  • 8401230456

  • Website on TOT : www.timesoftrade.com/company/759

instrument calibration

The kinds of services we offer to the customers are as following :
* Calibration of Energy Meters CT/PT and Relays
* Calibration of Digital Multi Meters Clamp Meters
* Calibration of Transducers and Signal conditioners Circuit Breakers and Relays
* Calibration of common Electrical Meters
* In situ calibration of scada/ plc based systems and multifunction daq systems 

Location : Ajmer


look

SPM Design Services

Capitalizing on our rich industrial experience, we offer our clients an extensive range of SPM Design Services that are acclaimed among the clients for its authenticity and flexible approach. We test the entire product range on varied parameters thereby delivering exceptional range of products to our clients.

Location : Vadodara


Vishwakarma Technocrafts

AC Repair & Service

AC Repair & Service :Samsung, Blue Star, O-General, Carriar, Voltas, Lg, Videocon, Bpl, Electrolux, Whirlpool, Hitachi, Godrej, National, Daikin, Panasonic, Haier, Mitsubishi, Sanyo, Lloyd, Ifb etc.
Repair Services in Panchkula.
 

Location : Vadodara


Coolcare Refrigeration

VFD Supply & Service

Vacon VFD service and Spare parts Supply.

Can do service for the entire range. Annual Maintenance contract for the entire Plant.

VFD Sales for Vacon, Danfoss

Location : Chennai


Chennai Engineering Instrument

Sub-Station Structure

We have employed with us an adroit team of designers and engineers, which helps us to render

Sub-Station Structure Services with ease. Our services are extensively used in telecommunication industry for power transmission applications. These services are rendered in accordance with the clients' specifications & industrial standards. To design and develop durable structures, we use latest technology and high grade stainless steel.

Location : Vadodara


Bileshwer Industries

Plane Table

We offer our clients a Plane Table which is primarily used in surveying and related areas. The Plane Table provides a solid and flat surface in order to make field drawings, charts and maps. These have been appreciated for characteristics like sturdy built and high durability. Our team of experienced designers is adept at designing Plane Tables which are solid and in adherence with the specifications detailed to us by our clients. These can be availed at industry leading prices. The Specifications of Plane Table are given below: Extensively used in surveying and allied areas Provides a level surface for drawing charts and maps improved durability and strength.

Location : Pune


Xitij Instruments Pvt. Ltd.

Industrial Automation

We are a leading service provider company offering Industrial Automation and Automation Control Panels based on customers specific requirements.These automation for productivity improvement, product & human safety & for pokayoke. Our Automations are low cost automation & user friendly.

Location : Nashik


VEDANT ENGINEERING SERVICES

  • Address : Plot No.23/A, Behind NMC School, Ambad Village, MIDC, Ambad, -.,
    Nashik - 422010,
    Maharashtra, India
  • 9960000815

  • Website on TOT : www.timesoftrade.com/company/1565

Fabricators and Machine Shops

Fully Equipped CNC Shop with Imported VMC’s and CNC Turning Centers, PLC Controlled Grinding and Hobbing.Conventional Machinery for all type of machining including Turning, Milling, Grinding, Drilling etc. All Pump Gears made inHouse on Imported Hobbing, Shaving and Shaping Machines, with Gear Quality DIN 8 or better routinely made. 

Location : Vadodara


deepak fabricators

Power Coated Crca

The company specializes in the said product which is very much available in best value and price.

Location : Vadodara


Automation Technologies

Tap Changer Bridge Tye

Voltage Class

11kV, 22kV, 33kV

Current Rating

30Amps, 50Amps, 60Amps, 100Amps, 200Amps, 400Amps

No. of Taps

5, 7, 9

No. of Phase

3, 5, 7

Type of Connection

Bridge (Ring) Type

Mounting

Horizontal, Vertical

Handle Assembly

Universal Link Type / Bevel Gear Type

Cooling Media

Transformer Oil

 

Payment Terms: T/T (Bank Transfer), Other
FOB Price: 2000 INR
Minimum Order Quantity: 1 Piece
Port of Dispatch: Kandala, Mundra
Production Capacity: 500 Pieces / Month
Delivery Time: 10 Days to 20 Days

Location : Rajkot


Intech Polymers

Radiography Testing Services

RT (Radiographic Testing)

Industrial radiography is used for a variety of applications but is commonly performed using two different sources of radiation, X-Ray and Gamma ray sources. The choice of radiation sources and their strength depends on a variety of factors including size of the component and the material thickness. Within the broad group of X-Ray and Gamma ray sources are a variety of camera choices with varying radiation strengths. CR Services X-Ray capabilities run the gamut from 4 MEV units utilized to radiograph extremely large and thick castings and forgings, to portable X-Ray cameras used for field weld applications and thin wall material inspection. Gamma sources vary from very low level fluoroscopic units to perform real time corrosion under insulation surveys, to Iridium (Ir192) and Selenium (Se 75) sources used for a variety of weld inspections, to Cobalt (Co 60) inspections for thick component testing.

There are many advantages to radiography including: inspection of a wide variety of material types with varying density, ability to inspect assembled components, minimum surface preparation required, sensitivity to changes in thickness corrosion, voids, cracks and material density changes, the ability to detect both surface and subsurface defects and the ability to provide a permanent record of the inspection.
The disadvantages of radiography are: safety precautions are required for the safe use of radiation, access to both sides of the specimen are required, orientation of the sample is critical, and determining flaw depth is impossible without additional angled exposures.
Radiographic testing is used extensively on castings and weldments. Radiography is well suited to the testing of semiconductor devices for cracks, broken wires, unsoldered connections, foreign material and misplaced components. Sensitivity of radiography to various types of flaws depends on many factors, including type of material, type of flaw and product form. Both ferrous alloys can be radio graphed, as can non-metallic materials and composites.

Location : Pune


CR Quality & Engg Services

  • Address : KEDAR EMPIRE 4TH FLOOR ERANDWANA KARVE ROAD NEAR DASH-BHUJA GANPATI TEMPAL, KOTHRUD PUNE -. MAHARASHTRA.,
    Pune - 411038,
    Maharashtra, India
  • 9764718939

  • Website on TOT : www.timesoftrade.com/company/2461

Copyrights © 2014-2017 Times of Trade. All Rights Reserved.