Feedback

Products of "Mechanical Parts"


Displaying : 21 to 40 of 172 products

Mechanical seal

1 single cartridge seal
type :GSE-108CRTS
single cartridge seal, SUITABLE For petroCHEMICAL , chemistry and paper making,medical industry.globe star mechanical seal manufacture . is the advanced designer & manufacturer of mechanical seal, the range involves in: industrial pump mechanical seal, mixer and agitator seal, cartridge seal, metal bellows seal, auto cooling pump seal and auto air-condition compressor lip seal. Globe products can replace the mechanical seals produced by John Crane and Burgmann and be widely used in petroleum, chemistry, refinery, paper making, pharmacy, power and auto industry.
OPERATING LIMITS
Temperature: -30℃~+270℃
Pressure: ≤2.8MPa

Rotary Ring:SiC/Carbon/TC/stellite
●Stationary Ring:SiC/Ceramic/TC
●Secondary Seal:VITON/PTFE Coated VITON/PTFE /NBR/EPDM /calrez
●Other Parts :SsS304/SsS316/Hastelloy-c


2 GROUNDFOS TYPE CARTRIDGE SEAL
type :GSE-108CRTGF
Grundfos pump seals are defined as an typical O-ring seal of the cartridge type.Different models of mechanical seal for a wide variety of Grundfos pumps,among them:CRN,NB,NK,CLM,LP,TP,CRR ETC.
Available in diverse combinations of materias and different diameters:12,16,22,etc.Also mechanical seals for the waste water pumps.Available in various materials:silicon-graphite carbide,silicon carbide- silicon carbide,combined with EPDM AND FKM elastomers.

3 cartridge seal
type :GSE-108CRTBL
For petroleum, chemistry and paper making single cartridge seal
OPERATING LIMITS
Temperature: -40℃~+204℃
Pressure: ≤5.17MPa
Speed: ≤23m/s


Rotary Ring:SiC/Carbon/TC
●Stationary Ring:SiC/Carbon/TC
●Secondary Seal:VITON/PTFE Coated VITON/PTFE
●Other Parts :SSS304/SSS316/Titanium/Hastelloy-C

 

4
dual cartridge seal
type :GSE-108CRTD
DOUBLE cartridge seal, For petroleum, chemistry and paper making,medical industry.globe star mechanical seal manufacture . is the advanced designer & manufacturer of mechanical seal, the range involves in: industrial pump mechanical seal, mixer and agitator seal, cartridge seal, metal bellows seal, auto cooling pump seal and auto air-condition compressor lip seal. Globe products can replace the mechanical seals produced by John Crane and Burgmann and be widely used in petroleum, chemistry, refinery, paper making, pharmacy, power and auto industry.
OPERATING LIMITS
Temperature: -20℃~+280℃
Pressure: >1.6MPa

Rotary Ring:SiC/Carbon/TC/stellite
●Stationary Ring:SiC/Ceramic/TC
●Secondary Seal:VITON/PTFE Coated VITON/PTFE /NBR/EPDM /calrez
●Other Parts :SsS304/SsS316/Hastelloy-c


5 METAL BELLOW Cartridge Seal
type :GSE-108CRTM


high temperature, non-pusher rotating welded metal bellows single seal
with the flexible element cartridge design. A rugged API 682 mechanical seal for handling high pressures
and high temperatures environments, which also has the flexibility to be fitted in an ANSI+ and DIN standards.
Pressure: 0~2.5Mpa
Temp.: -30ºC~300ºC
Speed: ≤25 m/s

6 heavy duty cartridge seal
type :GSE-108CRTHY

Mechanical Seal type cartridge for high pressures heavy duty in petrochemical industry and sealing of wide range of products such as crude, gasoline, LPG, water with muds. Designed according norm API682
Materials
Seal Body : SS 316 .SS304,MS
Outboard Faces : Metallized Carbon, Silicon Carbide (RB),TC,CERAMIC
Inboard Faces : Silicon Carbide (RB), Tungsten Carbide (Ni), Metallized Carbon
Elastomers : Viton, EPR, Chemraz, Kalrez,.TTV
Springs : Hastealloy C, AISI 316

Location : Ahmedabad


Globe Star engineerinf India Pvt.Ltd

  • Address : Head Office & Factory: 43, Nilkanth Estate, Nr. Bansari Estate, Opp. Police Station, G.I.D.C. Odhav, - . State – INDIA,
    Ahmedabad - 382415,
    Gujarat, India
  • 9574004240

  • Website on TOT : www.timesoftrade.com/company/1513

vaccume pump

Oil Free Diaphragm Type Vacuum Pump
Technical Specification

Location : Vadodara


Indo Air Compressors Pvt. Ltd

Peristaltic Pump

Tubing pumps i.e. peristaltic pumps are being used successfully in many industries like food processing, Pharmaceutical, chemical, laboratories for research, agriculture and water treatment. It is specifically used for dispensing, sampling, filtration, and general fluid transfer. Dosing pump is ideal for pumping abrasive as well as corrosive liquids. Considering general industrial requirements can give best result along with long tube life and less maintenance. All parts of pump are indigenous developed. Tubes, which are used in this, pump available in our country. Silicon tubing is used in this pump, which has long self life. We have wide range of pump with advance micro-controller base technology with precise and high accuracy. We supplied as per customer specifications.


Applications of Dosing Pump

  • Food / pharmaceutical processing where sterilization media dispensing Require.
  • Acid / base dosing.
  • Hot liquid transfer.
  • S M F battery manufacturing.
  • Printing ink transfer.
  • Acid filling in new battery installation and removing acid from battery while Maintenance.
  • Sugarcane juice sampling. Chemical additive pump.
  • Chemical dosing in batches processing.
  • Ideal for the Lab or Plant.
  • Pulp quality monitoring.
  • PH control of effluent.

Location : Vadodara


Instruments Universal

Coolant Pump

We are a leading and prominent manufacturer & exporter of Coolant Pump. Our product range also comprises of Textile Motors, Industrial Motors and Electric Motor. These pumps are of high quality and manufactured using latest technology. We offer these pumps at market leading prices.

Location : Vadodara


Sai Krupa Electric Motors Company

Shaft mounted Gear units

Interesting shaft mounting solutins

Range up to 400 kw & 522000 Nm torque

Location : Vadodara


Power Transmission Engineers

Hydraulic cylinders , power packs

We manufacture hydraulic cylinders of following type - tie rod , flanged , welded , compact type cylinders suitable for pressure up to 250 bar working pressure. Cylinders with bore dia up to 250 mm are available up to 1000 mm working stroke. We ensure strict quality standards during manufacturing followed by testing of our products. Also hydraulic Power packs are available as per your requirements.

Location : Pune


Mahalaxmi engineering services

Fasteners

We would like to introduce Reams Fasteners Pvt. Limited as supplier & manufacturer for total solutions of fasteners. We are supplier of all Industrial, Construction, Hardware, Automobile, Special & General fasteners.

 

Reams Fasteners Pvt. Limited are serve in all standards in all Grade for below Fasteners (High Tensile, MS & Stainless Steel)

 

       Bolts/Screw

§  Socket Head Cap Screw

§  Socket Countersunk Head Cap Screw

§  Socket Head Shoulder Screw

§  Socket Set Screw

§  Hex Head Bolt/Screw

§  High Strength Structural Bolt

§  High Tensile Track Shoe Bolt

  • Stud Bolts (EN8, B7, L7, B8, B8M, B8M Class II, B16)

§  Button Head Cap Screw

§  Flange Button Socket Screw

§  Durlok Bolts

§  Foundation Bolt

§  Anchor Bolt

 

       Nuts

§  Hex Nut

§  Nylock Nut

§  Durlok Nut

§  Weld Nut

§  Square Nut

§  High Strength Structural Nut

§  Heavy Hex Nut

 

       Washers

§  Spring Washer in Square Section & Flat Section

§  Durlok Washers

§  Hardened Washer

§  Hardened & Tempered Washers

 

       Others

§  Shear Connector

§  Rebar Coupler

§  Many more as per drawing

Location : Ahmedabad


Reams Fasteners Private Limited

Valves

We are the leading supplier of Globe valves. These Products are available in various Sizes & Specifications. Our Range of Globe Valve meets the various needs of Industries and is well appreciated by a wide base of clients owing to the below mentioned features. Corrosion resistant, Resistant to varying pressures &..

Location : Mumbai


supercast industries

Reduction Assembly 4:1

REDUCTION GEAR ASSEMBLY FOR NEMA 34 MOTOR

1. Modular design.
2. Designed for NEMA 34 motors.
3. Shaft size of the Big Pulley is 15 mm diameter which is sufficient for most modern transfer requirements.
4. 4:1 reduction.
5. 1.5 module pinion standard.
6. Pulley with 0.5” bore supplied for motor.

Location : New Delhi


Tiny Controls Private Limited

Choke Manifolds

A series of pipes and valves function to control the pressure experienced during a kick once the blowout preventers are closed. Usually four manual valves (five if bypass valve is included) control flow rate and reduce well pressure before flow enters the rest of the processing equipment.  

Location : Vadodara


Himtech Equipment Pvt. Ltd

Cryogenic Safety Valves

We are engaged in rendering Safety Valves For Cryogenic Services to the clients. These services are executed by our professionals who are experts in their field. Our services are rendered in accordance with both the industrial as well as international norms & standards of quality. Further. Our services are renowned for their reliability, effectiveness and timely execution. Moreover, our effective services can also be customized as per the demands of the patrons.

  • Media: Liquefied Gas such as Oxygen, Nitrogen, Argon, Carbon Dioxide etc
  • Size: DN6 (1/4") to DN25 (1”)
  • Temperature: -270oC (-454oF) to + 225oC (+437oF)
  • Pressure: 0.2 bar (3 psi) to 50 bar (725 psi)

Location : Vadodara


Cryogas Equipment Private Lilmited

Rotary Gear Pumps

Gear pumps are the most commonly used for handling and transferring any kind of viscous liquids.may these be petroleum and food products, dyes, syrups, corrosive chemicals, soaps, detergents. Starch asphalts, ink and paints etc. These are highly efficient and low coast positive displacement pumps.Jacketed pumps are also available which are required for handling substances like wax, which needs to be turned into fluid prior to moving them.

 

Location : Vadodara


Parekh & Company

Single Headed Landing Valve

We are an acclaimed name engaged in offering our precious clients a superior quality range of Single Headed Landing Valve. Find their wide usability in different areas; offered valves are strongly designed by our vendors using quality proven basic material and innovative technology in compliance with the industry standards. Considering their applications in different industries, we provide these optimal quality valves in several sizes.

Location : Vadodara


Dev Industrial Security & Fire Services

Industrial Valve

We are exclusively engaged in offering an excellent range of Industrial Valves, which are manufactured using premium grade factor inputs and latest technology in adherence to set industrial standards.

Location : Vadodara


Asten Pneumatic & Valves Automation

Brass Inserts

We are one of the well recognized business entity engaged in manufacturing and supplying high quality Brass Inserts. Manufactured using quality tested raw material, the range is known for durability and high strength. These Brass Inserts are available as per custom requirements 

Location : Vadodara


Ashwani Metals Pvt. Ltd

Industrial Hydraulic Cylinder

This type of hydraulic cylinders are mostly used in hydraulic press such as deep drawing, FRP, SMC etc... The cylinders are designed to with stand high pressure and high loads. This cylinders are specially designed as per customers requirement. This Hydraulic cylinders are custom design and are developed according to customers satisfaction and are developed according to their mountings. High pressure wall thickness are also available. Standard seal design are used to manufacture the piston and gland so that seal are easily available at global level.

Location : Rajkot


Shiv Shakti Hydraulics

  • Address : 503 - radhe heights, opp. jasani school, near d-mart, gondal road,
    Rajkot - 360004,
    Gujarat, India
  • 8866125712

  • Website on TOT : www.timesoftrade.com/company/1954

Valves

wide variety of valves are described in this section. All the valves are made of Borosilicate glass body and PTFE plugs so that process fluid comes into the contact of glass and PTFE only. Borosilicate glass body permits the visual checking of the operation.

All the valves are suitable for operation under full vacuum conditions and a maximum temperature of 200º C.

Location : Mumbai


Garg Process Glass India Private Limited

  • Address : No. 2/222, New Sonal Link Industrial Estate, Opposite Movie Time Theater, Link Road, Malad - West ,
    Mumbai - 400064,
    Maharashtra, India
  • 9892585351

  • Website on TOT : www.timesoftrade.com/gargglassindia-mumbai

Aluminum Alloy Connector Die Casting

Aluminum Alloy Die Casting Connector Manufacturer in China: Aluminum Alloy Connector, Used to Connect Mechanical Parts, No Surface Treatment.
Product: Connector.
Material: Aluminum Alloy.
Model NO.: JY-AADC-MP-08.
Processing: Die Casting.
Surface Treatment: No.
Application: Used to Connect Mechanical Parts.
Payment Terms: L/C, T/T, M/T, D/D, D/P, D/A and Others. 
Origin: Dongguan, Guangdong, China. 
Packaging Details: Blister Tray, Carton, Tray, Container. 
Terms of Delivery: FOB, CFR, CIF, DAP, DAT and Others.

Location : China


China Topper Aluminum Alloy Die Casting Company

Helical Gear

We are the leading organization in the industry, highly engaged in offering the best quality range of Helical Gear. The provided Helical Gear is precisely manufactured by our skilled professionals using the best quality raw material and advanced technology. Offered Helical Gear is much-admired by our esteemed...

Location : Vadodara


Shree Vinayak Engineering Works

self drilling screws

As a specialist in the domain, we are offering a qualitative assortment of Self Drilling Screws. To meet the various requirements of the customers, we al9is customized these Self Drilling Screws. The offered Self Drilling Screws are durable in nature. In addition to this, Self Drilling Screws are extensively used for drilling and fastening into soft and hardwood timber. Our products are quality approved.
Features:
* Free from defects
* Long lasting
* Excellent quality
 

Location : Vadodara


Ashinishi Mktg. & Engg. Company

Copyrights © 2014-2017 Times of Trade. All Rights Reserved.