Products of "Voltage & Power Transformers"

Displaying : 1 to 9 of 9 products

Oil Surge Relays

We are offering our customers a wide range of Oil Surge Relays. These Relay used for Power transformers with Trip Contacts. Bucket Type arrangement.

Location : Vadodara

Dhruv Enterprise

Super Ultra Isolation Transformer - RUT


  • Input Voltage (Primary) : 230V (183V to 264V) or 115V (98V to 132V).
  • Output Voltage (Secondary) : 230V (183V to 264V) or 115V (98V to 132V).
  • Common Mode Noise Rejection : More than 130dB.
  • DC Galvanic Isolation : More than 1000M Ohm between any Winding or Winding to Case.
  • Break Down Voltage : 2.5KV AC for 2 Minutes between any winding or Winding to Case.
  • Acceptable Line Frequency : 46 to 56Hz.
  • Input / Output Termination : Terminal Strips.


  • Built-in Transient Suppressor Limits Surges & Spike of 100V / µs.
  • Built-in RFI / EMI Suppressor.
  • Input Cable with Plug.
  • Output Socket of Required Rating

Location : Pune


Distribution Transformer Tank

we are engaged in offering transformer tanks to the customers. these products are fabricated using quality raw material and other components. we offer up to 5 mva tanks and in various rating and size to meet the variegated requirements of the clients.


Location : Vadodara

Mangaldeep Industries

Distribution Transformer

The purpose of a distribution transformer is to reduce the primary voltage of the electric distribution system to the utilization voltage serving the customer. A distribution transformer is a static device constructed with two or more windings used to transfer alternating current electric power by electromagnetic induction from one circuit to another at the same frequency but with different values of voltage and current.

Location : Noida

Kapco Electric pvt ltd

Resin Cast CT PT

We are the manufacturer of Resin cast current transformers, are available for metering & protection application. CT coils are encapsulated in cast resin (Polyester / Epoxy). Resin Cast Transformers are dry type transformers the active part of which is completely embedded in quartz loaded Epoxy Resin by using vacuum moulding technique.

Location : Noida

KVA Power Equipments LLP

  • Address : A-8, Sector 83, Phase II,
    Noida - 201305,
    Uttar Pradesh, India
  • 9953752512

  • Website :

Servo Controlled Voltage Stabiliser

Manufacturers of KRYKARD Servo Controlled Voltage Stabiliser from 1kVA to 2000kVA

Location : Chennai

Atandra Energy Pvt Ltd

Transformer Loss Measuring System

EPRO has developed a revolutionary measurement system, in order to help high voltage laboratories or equipment manufacturer testing their equipment.

EPRO measurement system, using the latest technologies of electronics, was developed following one goal, integrating all the test and measurements in the laboratory or in the factory, under one system, to ease control of the Equipment Under Test (EUT) and to integrate all test results in one test report without large manpower.

Basic Measurements:
No Load Loss
Load Loss
Heat Run
Induced Voltage
Zero Sequence
All these measurements are realized according to the latest standards, IEC-60076-1,-2, -3, -8 ANSI/IEEE C57.12.90

On demand other measurements can be integrated in the test system:
Winding Resistance, Transformer Turn Ratio, Partial Discharge and so on.

System Highlighs:
Accuracy - high accuracy of EPRO measurement, better than 0.1 % in case of very low power factor of 0.05
Ease of use - the Software with 2 lage screens bring all information about measurements, standards and accuracy
Full automatic test - full measurement without rewiring the test equipment
Modularity - highly modular, every measurement can be combined
Scalability - large range of measurements transformers which can be equipped with a Measurement Box and connected to the EPRO Measurement Center
Integration - with the EPRO communication box it is possible to control and interface on demand all existing third party equipment
Self verification - the EPRO voltage and current measurement box can verify their calibration data
Easy and efficient recalibration of the measurement box - for the recalibration you don`t need the responsible measuring transformer. Because of this the delivery to EPRO Gallspach GmbH is very easy and convenient. The modulary assembling of the system allows to use substitute boxes while the calibration time which we can provide.


Location : Vadodara

Next Gen Equipments Private Limited

power distribution transformer

We are extensively engaged in manufacturing and supplying Distribution Transformers. These transformers used mainly for transformation of current supply response frequently with the sources and then supplies the output using the input. These electric transformers usually store the energy from one source and then... 

Location : Vadodara

deepak fabricators

Assessment Services For Transformers

As an eminent enterprise, we are offering Assessment Services For Transformers. This service is timely executed by our highly qualified professionals using high grade machines and advanced technology. The provided services are highly applicable for large power transformers to help customers understand operational issues, determine root cause, gauge the health of the transformer and obtain remedial and preventive maintenance recommendations in order to improve asset reliability. We offer these services as per the requirements of our clients within scheduled time-frame.

Ratio Measurement

  • C-Tan Delta of bushings
  • Measurement of water content in insulation paper
  • Partial Discharge Measurement
  • Oil Test
  • Short Circuit Impedance Measurement
  • Winding and core diagnosis with FRA
  • C-Tan Delta of winding insulation
  • Winding resistance

Location : Vadodara

Laxmi Associates

Copyrights © 2014-2017 Times of Trade. All Rights Reserved.